Product categories

Victron BMV 700 Battery Monitoring

2 572 CZK 2 126 CZK without VAT
Common price: 3 096 CZK

After order for 5 days

Personal pickup at place
Code: BATGWL0175 PN: BAM010700000 Warranty: 60 months
Victron BMV-700 A highly accurate battery monitoring system. Monitoring the battery status helps achieve longer lifespan. Detailed battery monitoring allows detection of potential operational deficiencies. Suitable for all... more
Victron BMV-700

A highly accurate battery monitoring system. Monitoring the battery status helps achieve longer lifespan. Detailed battery monitoring allows detection of potential operational deficiencies. Suitable for all types of lead-acid batteries including AGM and gel. Regular automatic calibration of the device ensures reliable measurement data (can also be done manually). The monitor is also suitable for Li-ion batteries.

  • Simple setting of battery capacity (factory default is set to 200 Ah)
  • Automatic voltage detection 12, 24, 36, 48, 60, 120, 144, and 288 V.
  • Designed for systems with high operating voltage (DC 70 - 350 V)
  • Also suitable for Li-ion batteries

Basic displayed values:

  • Current battery voltage (V)
  • Current current (A) flowing into (positive values - charging) or out of (negative values - discharging) the battery
  • Current power (W) flowing into (positive values - charging) or out of (negative values - discharging) the battery (multiple of voltage and current)
  • Total sum of energy drawn from the battery to power devices in ampere-hours (Ah)
  • Current battery charge rate in percentage
  • Estimated (sophisticatedly calculated) time duration in hours until 50% battery discharge at the given energy consumption

The monitor saves selected historical data and achieved threshold values:

  • Deepest battery discharge reached
  • Last battery discharge rate
  • Number of discharge/charge cycles of the battery
  • Average battery discharge value
  • Number of full battery discharges
  • Maximum battery voltage reached
  • Minimum battery voltage reached
  • Number of days since the last full battery charge

Technical parameters:

  • Supply voltage 6.5–95 V DC
  • Power consumption with backlight off and relay off: 4 mA (12 V) and 3 mA (24 V)
  • Power consumption with backlight off and relay on: 15 mA (12 V) and 8 mA (24 V)
  • Operating voltages: 12, 24, and 48 V (auto-detect)
  • Maximum current passing through shunt: -500 to +500 A (battery discharge and charging)
  • Maximum voltage reading deviation: ±0.01 A at 0–100 V
  • Maximum current reading deviation: ±0.01 A with 500 A shunt
  • Maximum capacity reading deviation: ±0.1 Ah at battery capacity 0–100 Ah
  • Maximum capacity reading deviation: ±1 Ah at battery capacity 100–9999 Ah
  • Maximum charge state reading deviation: ±0.1 %
  • Maximum remaining time estimate deviation: ±1 hour (range 1–240 hours)
  • Maximum power reading deviation: ±1 W in the range from -100 W to 1 kW
  • Total battery capacity: 20–9999 Ah
  • Operating temperature range: -20 to +50 °C
  • Round diameter of the monitor: 63 mm
  • Square size of the monitor cover: 69 × 69 mm
  • Depth of the monitor: 31 mm
  • Relay: 60 V (1 A) maximum
  • Weight of the monitor: 70 g
  • Weight of the shunt: 315 g
  • Shunt connection screws: M10
  • Material: plastic

The monitor performs sophisticated tracking of delivered and consumed energy taking into account the adjustable Peukert exponent value (the higher the energy consumption, the relatively lower the amount of available energy in the battery and vice versa) and battery efficiency for estimating the current amount of energy (Ah) and battery charge rate (in percentage). To correctly display the amount of available energy in the battery, all energy entering and leaving the battery must pass through the shunt.
The monitor can be integrated into the wall without the need for rear access (concealed screws).
For higher currents exceeding 500 A, a replacement shunt designed for currents of 1000 and 2000 A can be supplied. The monitor can use shunts up to a maximum current of 9999 A with a voltage range of 1 - 100 mV (both adjustable).
The monitor features a relay. It is activated/deactivated based on the measured battery charge rate. The factory settings are set to switch on when the battery charge state drops below 50% and switch off when the battery charge state reaches 90%. These values can be changed in the settings. The relay logic can also be reversed, i.e., the relay is normally on, and it turns off under abnormal conditions. The relay can be used for switching on/off devices such as an external alarm, power station, etc.
The monitor can be connected to other devices. The BMV-700 monitor can be connected to the large color display Color Control GX with free graphical visualization option of measured values on the portal https://vrm.victronenergy.com/user/register (can be tested on functional systems with username: demo@victronenergy.com and password: vrmdemo). To connect the BMV-700 monitor to the Color Control GX display, you need to purchase either a VE.Direct cable or a VE.Direct-USB communication interface.

Package contents:

  • Monitor with backlit digital display and control elements
  • Plastic cover for the monitor with dimensions 69 × 69 mm
  • 500 A / 50 mV shunt designed for a maximum current of 500 A (installed on the negative battery cable)
  • 10m communication and power UTP cable RJ-12 (connection of the monitor to the shunt)
  • 2 m long installation cable with fuse for connection to the positive cable

BASIC SPECIFICATIONS

Interface: RJ-12, VE.Direct, terminal block
Supported battery types: lead-acid, VRLA (gel and AGM), Li-ion, LiFePO4
Power supply voltage range: DC 6.5–95 V
Battery capacity: 1–9999 Ah
Measurement of second battery voltage, temperature, or median: no
Dimensions: 63 × 63 × 31 mm


Up to four Color Control GX devices can be directly connected to one BMV device. More BMV units can be connected to the USB hub.

Brand
Manufacturer :  VICTRON
Type specification :  Electrical accessories up to 1kg
Technical specification
Operating temperature min./max. (°C) :  -40 až +50 °C
Max. operating temperature (°C) :  50
Min. operating temperature (°C) :  -20
Power supply
Max. Input Current (A) :  500
Input voltage (V) :  6,5 - 95
Input Voltage (V) :  6,5 - 95 (DC)
Warranty
Warranty period CRN (months) :  60
Warranty period EU (months) :  60
Physical properties
Weight (kg) :  0.07
Dimensions :  63 × 63 × 31 mm
Height (mm) :  63
Width (mm) :  63
Depth (mm) :  31
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Similar products

Scroll