Product categories

Solarmi HRN-43N / 230V Voltage Monitoring Relay, 3f

2 053 CZK 1 697 CZK without VAT
Common price: 2 149 CZK

After order for 5 days

Personal pickup at place
Code: ELESMI0004 PN: HRN-43N/230 Warranty: 26 months
Xtend Solarmi HRN-43N/230V Voltage Monitoring Relay HRN-43N/230V This relay is designed for monitoring voltage in 3-phase networks. The HRN-43N type monitors voltage against the neutral conductor. The relay can monitor... more
Xtend Solarmi HRN-43N/230V

Voltage Monitoring Relay HRN-43N/230V
This relay is designed for monitoring voltage in 3-phase networks. The HRN-43N type monitors voltage against the neutral conductor. The relay can monitor voltage in two levels (overvoltage/undervoltage), phase sequence/failure, and phase asymmetry. Each fault condition is indicated by a separate LED. By selecting the DIP switch "Output," you can choose the function of the output contacts: independent function (1× for overvoltage, 1× for undervoltage) or in parallel. A fixed time delay (t1) is applied when transitioning from a fault to a normal state or during a voltage outage. The adjustable time delay Umax/Umin (t2) is applied when transitioning from a normal state to a fault state. This prevents incorrect behavior and oscillation of the output device during short-term drops and spikes.

Voltage Monitoring
The upper level Umax is set in the range of 138–276 V, and the lower level Umin is set in the range of 35–99% Umax. If any phase deviates from this set range, the output contact will disconnect after the set delay. The output contact will reconnect when returning to the monitored range and surpassing the fixed hysteresis (selectable with the DIP switch "Hysteresis"). In the event of two or three phases failing, the output contacts will immediately disconnect regardless of the set delay t2.

Phase Sequence
It monitors the correct phase sequence. In the event of an unwanted change, the output contacts will disconnect. After turning on the relay with an incorrect phase sequence, the output contact remains disconnected.

Asymmetry
The level of asymmetry between individual phases is set in the range of 5–20%. If the set asymmetry is exceeded, the output contact will disconnect, and the LED indicating asymmetry will light up. Time delays t1, t2, and hysteresis are applied when transitioning to a normal state. Monitoring asymmetry can be disabled with the DIP switch "ASYM."

  • Wired for 3× 230 V star connection (including neutral conductor)
  • Monitors voltage in two independent levels (Umax, Umin) for overvoltage and undervoltage: 3× 230 V system: range 138–276 V
  • Additional monitored parameters: failure/sequence/asymmetry of phases (adjustable, can be disabled)
  • Setting of the monitored lower level (Umin) in % of the set upper level Umax
  • Adjustable time delay (eliminating short-term drops and spikes)
  • Optional function of output contacts (independently/in parallel)
  • Galvanically isolated AC 230 V power supply
  • Output contact for each monitored voltage level

SPECIFICATIONS

Design: 3-module
Output: 2× switching contact, 16 A
Supply Voltage: AC 230 V (50–60 Hz)
Monitored Range: AC 3× 48–276 V
Lifetime: 10,000,000 cycles (mechanical), 100,000 cycles (electrical, AC1)
Mounting: DIN rail (EN 60715)
Protection: IP40 (front panel), IP20 (terminals)
Standards according to ČSN: EN 60255-1:9/2010, EN 60255-26 ed. 3:3/2014, EN 60255-24 ed. 2:8/2014, EN 50581:06/2013 +Z1:2019
Dimensions: 90 × 65 × 52 mm
Weight: 248 g


Wiring Diagram:


Brand
Manufacturer :  XTEND Solarmi
Type specification :  Other
Technical specification
Max. operating temperature (°C) :  55
Min. operating temperature (°C) :  -20
Inputs and outputs
Connector :  terminal
Power supply
Frequency (Hz) :  50-60
Input Voltage (V) :  230 (AC)
Warranty
Warranty period CRN (months) :  26
Warranty period EU (months) :  26
Physical properties
Weight (kg) :  0.248
Dimensions :  90 × 65 × 52 mm
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Similar products

Scroll